How To Light Pilot Light On Gas Fireplace Insert

Www.hearthandhomeusa.com This System Comprises A Little Burner, A Gas Valve System, And Thermocouples.

A therm = 100,000 btu. Insert key into gas valve. So, if your pilot uses 1,000 btu/hr and it is running for 24 hours a day, and 30 days a month, that comes out to be about 720,000 btu.

Next, Look For The Gas Valve Next To Your Fireplace.

Press the button to verify that there’s a spark at the end of the pilot tube. Remember to do this when you are ready to ignite the pilot light of your gas fireplace. For a natural gas home, you pay for your gas by the therm.

Your Pilot Light Will Be Located At The Bottom Of The Fireplace With The Gas Controls.

As the pilot light is required to help start the main burner flames. To ignite the pilot light, press your finger into the center of the control knob and hold it in place. The pilot light in a gas fireplace is typically found adjacent to the main burner, below the fireplace media such as logs or coals.

Holding Up The Gasoline Controlling Dial For 30 To 45 Secs After The Pilot Illuminates To Enable Room For The Thermostat, A Protection Mechanism, To Warm Up, Then Let The Dial, So It Rises.

Here are the how to steps required to manually light your legend valor gas fireplace pilot light.if you're having problems with remote ignition, there’s p. If you don’t see any button, you must light the flame manually. The pilot light in a gas fireplace is typically found adjacent to the main burner, below the fireplace media such as logs or coals.

If You Turn The Key Before You Are Prepared To Ignite The Burner, You Could Release Too Much Gas And Risk A.

To do this, you need to take off the decorative cover. Do all gas fireplaces have a pilot light? Reset the knob to the pilot position: